Description
Bent stainless steel (304) connector for soft-wall tubing to PDMS to accommodate substrates of various thicknesses. Bend angle is 120° with one side being 10mm in length and the other side being 20mm in length for total length of approximately 30mm.
Available in select outer diameters (±0.01 mm) to cover a range of soft-wall tube inner diameters. The connector should have a larger outer diameter than the tube ID and PDMS hole diameter.
| Gauge | OD (mm) |
ID (mm) |
| 20G | 0.90 | 0.60 |
| 18G | 1.27 | 0.83 |
| 16G | 1.63 | 1.19 |
