Description
The CF600 Plus II Peristaltic Filling and Dispensing Pumps allows for simultaneous control of four independent groups of FTII Pumps (max four per group) for robust dispensing automation needs. In total, up to 16 pumps each with a closed-loop stepper motor can be programmed and controlled from a single touch screen interface. The stainless steel housing and the patented EasyPump Head offers a robust solution for any industrial process requiring flow rates up to 3 L/min.
Each set contains one touchscreen controller and two peristaltic pump units. For additional pump units or different pump heads per module, please email us at info@elexansci.com
We are currently unable to support troubleshooting for applications requiring RS232/RS485 MODBUS communication at this time.
Flow rate vs tubing size was measured using water at room temperature. Many variables such as temperature, pressure, viscosity, resistance, etc will affect the final flow rate.
| Tubing # | ID x WT (mm) | mL/RPM | Flow Rate (mL/min) | Pump Head Model | Intermittent Max. Pressure |
| #13 | 0.8 x 1.6 | 0.053 | 0.053 - 32 | EZ I & III | 0.27 MPa |
| #14 | 1.6 x 1.6 | 0.27 | 0.027 - 162 | EZ I & III | 0.27 MPa |
| #19 | 2.4 x 1.6 | 0.55 | 0.055 - 330 | EZ I & III | 0.27 MPa |
| #16 | 3.2 x 1.6 | 0.93 | 0.093 - 560 | EZ I & III | 0.27 MPa |
| #25 | 4.8 x 1.6 | 2.0 | 0.20 - 1180 | EZ I & III | 0.24 MPa |
| #17 | 6.4 x 1.6 | 3.3 | 0.33 - 2000 | EZ I & III | 0.14 MPa |
| #18 | 7.9 x 1.6 | 4.3 | 0.43 - 2580 | EZ I & III | 0.10 MPa |
| #15 | 4.8 x 2.4 | 1.8 | 0.18 - 1080 | EZ II & IV | 0.27 MPa |
| #24 | 6.4 x 2.4 | 2.7 | 0.27 - 1640 | EZ II & IV | 0.27 MPa |
| #35 | 7.9 x 2.4 | 3.8 | 0.38 - 2300 | EZ II & IV | 0.24 MPa |
| #36 | 9.6 x 2.4 | 5.2 | 0.52 - 3100 | EZ II & IV | 0.24 MPa |
